RDJ500/1500-200.2000 Type Hot Isostatic Press
Main Technical parameters
- Maximum working pressure: 200MPa;
- Maximum working temperature: 2000ºC,Common operating temperature:1850ºC;
- The effective diameter of heat zone:Φ500mm;
- The effective height of heat zone:1500mm;
- Heating material:C/C;
- Temperature thermocouple:WRe3/25(JB/T9497-2002),when working temperature is not less than1700ºC,the Thermocouple service life is 1 furnace time;
- Working medium:high purity nitrogen or argon(99.99%);
- Vacuum degree(room temperature,no working parts):≤500Pa;
- Vacuum time(room temperature,no working parts):t≤30min;
- Maximum temperature deviation of effective hot zone from 800ºC to 1850ºC(no working parts,Heat preservation stage,pressure 50MPa~150MPa,Refer to GB/T9452-2012 and adopt the WRE3/25 workpiece thermocouple for 9 point temperature measurement):≤±10ºC;
- Heating up time(no working parts):room temperature~1850ºC≤4h;
- 0~60MPa Prepressurized time(no working part):≤4h;
- Maximum weight capacity of working table:600kg;
- Gas recovery rate:≥80%;
- Pressure measurement accuracy:≤0.5%F.S.;
- Loading mode: upper loading;
- Install way: Pit installation, ground operation
Operating conditions
- Altitude:≤2000m;
- Temperature:+5ºC~+40ºC;
- Relative humidity of air is not more than 90%(20ºC);
- Power supply requirement:Installation power is about 1200kW(AC380V±10%,50Hz±1%,TN-S income wire system);
- Water supply requirement:Pressure0.3~0.5MPa, Flow≥50m³/h,Water inlet temperature ≤30ºC,Water outlet temperature≤45ºC;
- The working limit height of the crane hook in the workshop of the hot isostatic press is from the ground≥5.5m,hoisting weight≥6t;
- A place free from fire,serious pollution,chemical corrosion,violent vibration and strong disturbance sources.
Our main type of press is as follows:
1. Cold Isostatic Press:
S.NO. |
Type |
Diameter of Pressure
Vessel |
Depth of Pressure
Vessel |
Maximum Isostatic
Pressure |
1 |
CIP 200/300-300 |
200mm |
300mm |
300Mpa |
2 |
CIP 200/1000-300 |
200 mm |
1000mm |
300Mpa |
3 |
CIP 420/4000-320 |
420mm |
4000mm |
320Mpa |
4 |
CIP 500/1200-400 |
500mm |
1200mm |
400Mpa |
5 |
CIP 500/1500-300 |
500mm |
1500mm |
300Mpa |
6 |
CIP 710/2000-250 |
710mm |
2000mm |
250Mpa |
7 |
CIP 1000/3500-200 |
1000mm |
3500mm |
200Mpa |
a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the
cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running
2. Hot Isostatic Press:
S.NO. |
Type |
Diameter of
Pressure Vessel |
Height of
Pressure Vessel |
Pressure |
Temperature |
1 |
HIP 800/1200-150/1000 |
800mm |
1200mm |
150Mpa |
1000degrees |
2 |
HIP 1250/2000-200/1400 |
1250mm |
2000mm |
200Mpa |
1400degrees |
3. Warm Isostatic Press:
S.NO. |
Type |
Diameter of
Vessel |
Length of
Vessel |
Pressure |
Temperature |
1 |
WIP D500-L2000/P200mpa-T300 |
500mm |
2000mm |
200Mpa |
300degrees |
2 |
WIP D300-L1500/P250mpa-T200 |
300mm |
1500mm |
250Mpa |
200degrees |
3 |
WIP D630-L2000/P250mpa-T300 |
630 mm |
2000mm |
250Mpa |
300degrees |
a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the
warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.
Contact Us:
Marketing Manager: |
George Sun |
|
|
|
|
Website: |
chinasun99.en.made-in-china.com |
Address: |
88# Zhujiang Road,Nanjing,Jiangsu,China |