Rdj650/1500- 200.1400 Type Hot Isostatic Press

• Warranty: 24 Months
• Feature: High Efficiency
• Customized: Customized
• Condition: New
• Maximum Working Pressure: 200MPa
• Maximum Working Temperature: 1400
• Model NO.: RDJ650/1500- 200.1400 Type
• The Effective Diameter of Heat Zone: 650mm
• The Effective Height of Heat Zone: 1500mm
• Loading Mode: Upper Loading
• Heating Wire Material: C/C
• Working Medium: Ar Purity:99.99%Min
• Gas Recovery Rate: 80% Min
• Install Way: Pit Installation
• Type: Gantry Hydraulic Press
• Certification: ISO9001, CE
• Transport Package: Pallet Package
• Specification: RDJ650/1500- 200.1400 Type
• Trademark: SHUOHAIPU
• Origin: China
• HS Code: 8479899951
• Production Capacity: 50 Sets/Year

Product Description

RDJ500/1500-200.2000 Type Hot Isostatic Press 
 

Main Technical parameters

1. Maximum working pressure: 200MPa;
2. Maximum working temperature: 1400ºC;
3. Common operating temperature: 1300ºC;
4. The effective diameter of heat zone: Φ650mm;
5. The effective height of heat zone:1500mm;
6. Heating wire material: Molybdenum-Lanthanum alloy; 
7. Vacuum degree(cold state, no working parts): ≤1000Pa;
8. Vacuum time(cold state, no working parts): t≤30min; 
9. Working medium: Ar (Purity≥99.99%);
10. Maximum temperature deviation of effective hot zone from 700ºC to 1300ºC(no working parts,Heat preservation stage, pressure ≥30MPa):≤±10C;
11. Heating up time:≤3h(no working parts,room temperature~1300ºC);
12. 0~60MPa Prepressurized time(no working part):≤3h(as the temperature rising to 1400ºC, the pressure natural expansion reaches 200MPa).
13. Gas recovery rate:≥80%;
14. Loading mode:upper loading;
15. Install way: Pit installation

 

Operating conditions

 

1. Altitude: ≤2000m;
2. Temperature:+5ºC~+40ºC;
3. Relative humidity of air is not more than 90%(when room temperature is 20ºC);
4. Power supply requirement:AC380V ±10%,50Hz ±1%,TN-S income wire system( Three-phase five-wire system);
5. Outlet circulation water supply requirements:Flow≥80m³/h, Pressure0.3~0.5MPa, Water inlet temperature ≤30ºC,Water outlet temperature≤45ºC;
6. The working limit height of the crane hook in the workshop of the hot isostatic press is from the ground≥7m,the hoisting weight≥20t;
7. A place free from fire,serious pollution,chemical corrosion,violent vibration and strong disturbance sources.
8. The weight and dimensions of the main components are:
9. Yoke frame (2 sets):about 129t per set, each size 4180mmX 810mmX 9435mm;
   Vessel :about 150t, size 2700mmX 2700mmX 5045mm;

Our main type of press  is as follows:


1. Cold Isostatic Press:

S.NO.	Type	Diameter of Pressure  Vessel	Depth of Pressure  Vessel	Maximum Isostatic  Pressure
1	CIP 200/300-300	200mm	300mm	300Mpa
2	CIP 200/1000-300	200 mm	1000mm	300Mpa
3	CIP 420/4000-320	420mm	4000mm	320Mpa
4	CIP 500/1200-400	500mm	1200mm	400Mpa
5	CIP 500/1500-300	500mm	1500mm	300Mpa
6	CIP 710/2000-250	710mm	2000mm	250Mpa
7	CIP 1000/3500-200	1000mm	3500mm	200Mpa

a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running

2. Hot Isostatic Press:

S.NO.	Type	Diameter of Pressure Vessel	Height of  Pressure  Vessel	Pressure	Temperature
1	HIP 800/1200-150/1000	800mm	1200mm	150Mpa	1000degrees
2	HIP 1250/2000-200/1400	1250mm	2000mm	200Mpa	1400degrees

3.  Warm Isostatic Press:

S.NO.	Type	Diameter of Vessel	Length of   Vessel	Pressure	Temperature
1	WIP D500-L2000/P200mpa-T300	500mm	2000mm	200Mpa	300degrees
2	WIP D300-L1500/P250mpa-T200	300mm	1500mm	250Mpa	200degrees
3	WIP D630-L2000/P250mpa-T300	630 mm	2000mm	250Mpa	300degrees

a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.

Contact Us:

Marketing Manager:	George Sun
Website:	chinasun99.en.made-in-china.com
Address:	88# Zhujiang Road,Nanjing,Jiangsu,China