Rdj400/1000-200.1400 Type Hot Isostatic Press

• Warranty: 24 Months
• Feature: High Efficiency
• Customized: Customized
• Model NO.: RDJ400/1000-200.1400 Type
• Condition: New
• Maximum Working Pressure: 200MPa
• Maximum Working Temperature: 1400
• The Effective Diameter of Heat Zone: 400mm
• The Effective Height of Heat Zone: 1000mm
• Loading Mode: Upper Loading
• Heating Wire Material: Molybdenum Lanthanum
• Working Medium: Ar Purity:99.99%Min
• Gas Recovery Rate: 80% Min
• Install Way: Pit Installation, Ground Operation
• Type: Gantry Hydraulic Press
• Certification: ISO9001, CE
• Transport Package: Pallet Package
• Specification: RDJ650/1500- 200.1400 Type
• Trademark: SHUOHAIPU
• Origin: China
• HS Code: 8479899951
• Production Capacity: 50 Sets/Year

Product Description

RDJ500/1500-200.2000 Type Hot Isostatic Press 
 

Main Technical parameters

1. Maximum working pressure: 200MPa;
2. The effective diameter of heat zone: Φ400mm;
3. The effective height of heat zone: 1000mm;
4. Maximum working temperature: 1400ºC,Common operating temperature≤1300ºC;
5. Heating wire material: Molybdenum lanthanum
6. Vacuum degree:  ≤500Pa;
7. Vacuum extraction time: t≤30min (cold state,empty furnace,from atmospheric conditions decrease to 1000Pa)
8. Working medium: Ar ( Purity≥99.99%);
9. Heating up time (no working parts): room temperature~1400ºC≤3h;
10. 0~70MPa Prepressurized time(no working part): ≤3h( After booster to the pre-pressurized pressure,the pressure expands naturally to 200MPa with the temperature rising to 1400ºC );   
11. Gas recovery rate:  ≥80%;
12. Loading mode:  upper loading;
13. The power supply of press :Three-phase five wire system TN-S income wire,AC380V±10%,50Hz±1%;
14. Install way: Pit installation, ground operation;

 

Operating conditions

 

1. Altitude: ≤2000m;
2. Temperature:+5ºC~+40ºC;
3. Relative humidity of air is not more than 90%(20ºC);
4. Power supply requirement: AC380V(±10%),50Hz(±1%),TN-S income wire system (Three-phase five wire system);
5. Water supply requirement: Pressure 0.3~0.5MPa, Flow≥60m³/h, Water inlet temperature ≤30ºC,Water outlet temperature≤45ºC;
6. The working limit height of the crane hook in the workshop of the hot isostatic press is  from the ground≥5.5m,hoisting weight≥6t;
7. A place free from fire,serious pollution,chemical corrosion,violent vibration and strong disturbance sources

Our main type of press  is as follows:


1. Cold Isostatic Press:

S.NO.	Type	Diameter of Pressure  Vessel	Depth of Pressure  Vessel	Maximum Isostatic  Pressure
1	CIP 200/300-300	200mm	300mm	300Mpa
2	CIP 200/1000-300	200 mm	1000mm	300Mpa
3	CIP 420/4000-320	420mm	4000mm	320Mpa
4	CIP 500/1200-400	500mm	1200mm	400Mpa
5	CIP 500/1500-300	500mm	1500mm	300Mpa
6	CIP 710/2000-250	710mm	2000mm	250Mpa
7	CIP 1000/3500-200	1000mm	3500mm	200Mpa

a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running

2. Hot Isostatic Press:

S.NO.	Type	Diameter of Pressure Vessel	Height of  Pressure  Vessel	Pressure	Temperature
1	HIP 800/1200-150/1000	800mm	1200mm	150Mpa	1000degrees
2	HIP 1250/2000-200/1400	1250mm	2000mm	200Mpa	1400degrees

3.  Warm Isostatic Press:

S.NO.	Type	Diameter of Vessel	Length of   Vessel	Pressure	Temperature
1	WIP D500-L2000/P200mpa-T300	500mm	2000mm	200Mpa	300degrees
2	WIP D300-L1500/P250mpa-T200	300mm	1500mm	250Mpa	200degrees
3	WIP D630-L2000/P250mpa-T300	630 mm	2000mm	250Mpa	300degrees

a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.




 

Company Profile

 

SICHUAN SUOHAIPU ISOSTATIC PRESSING TECHNOLOGY & EQUIPMENT CO., LIMITED was founded in 2005. It is a professional and leading manufacturer in design and producing Isostatic Press Machine, including Cold Isostatic Press(CIP), Warm Isostatic Press(WIP) and Hot Isostatic Press(HIP), dedicated to research, development and manufacture of cold isostatic presses. It is famous for its efficient R&D and technological breakthroughs.

At present, cold isostatic press has been widely used in industrial ceramics pressure forming, high temperature refractories, cemented carbides, permanent magnets, rare metal powder forming and other fields, occupying a considerable market share. Up to now, we have provided more than 500 sets of isostatic presses to the Chinese and international markets. All our products have passed the CE certification with PED clause issued by the European Union. Export countries or regions include Brazil, Russia, Europe, India, Taiwan and etc...

We have always insisted on technological innovation, obtained dozens of invention patents and utility patents, and formed a complete series of cold isostatic pressing process products, with strong technical backbone, which can quickly meet the special requirements of customers.

 

 

Certifications

 
 

Packaging & Shipping

 

After Sales Service

1. Supply one year normal uses spare parts within warranty time.
2. Supply technical support during the whole life of the press machine.
3. Training Technicians and operators for the buyer.
4. Delivery one set of technical documents.
5. Send technicians to the buyers workshop to guide buyer make the installation and commissioning free of charges.The fly ticket and the board and lodging on the buyer's account.
6. One year later(after the warranty), spare parts still also would be supplied by us but the charges to be on the buyer's account.

Sichuan Suohaipu Isostatic Pressing Technology and Equipment Co., Ltd. is a professional and leading manufacturer in design and producing Isostatic Press Machine, including Cold Isostatic Press(CIP), Warm Isostatic Press(WIP) and Hot Isostatic Press(HIP). Up to now, we have supplied more than 500 sets of the presses to the market.

We have always insisted on technological innovation, obtained dozens of invention patents and utility patents, and formed a complete series of cold isostatic pressing process products, with strong technical backbone, which can quickly meet the special requirements of customers.

We sincerely hope to establish long terms business relations with customers worldwide in the line. Warmly welcome your inquiries, any ideas or suggestions, please feel free to contact us. Your attention and interests to our products would be fully appreciated.